二手 钢厂线材生产线杭集卷材剥线机剥线机 在 西安市, 陕西省, 中国
二手
Doubleclick to zoom in
请联系卖家咨询
更多照片和设备细节。
描述
A
. Main parameters:
1.Host size: 7. 9m x 2.5meters, open double door, width 4.8 m.
2.Two wire disk size: 1.75m x 1.75m
3.Two wire disk side by side, with host distance about 0.85m. The spacing is about 1. 5m.
4. Minimum occupation area: 10. 5m x 5m
5. Total installed capacity 27kW. Maximum simultaneous use capacity 20kW.
B. Installation:
"host", "wire", "oil station" on the flat ground. The main engine is adjusted to the basic level, the bottom is set at six points, and the door is opened or closed symmetrically. At this point, if the door closes a certain angle, the door will automatically continue to close. Conversely, if the door opens a certain angle, then the door will automatically continue to open. This shows that the host level is good, otherwise it should be re adjusted. The body and the supporting force to prevent bending welding. The bottom of the dial is also adjusted to the basic level. Its two bent support frames are located in the rear.
2.T
Services offered by seller
本卖家提供现场拆装
该卖家提供咨询服务
该卖家提供新机器
该卖方可以帮助您计划和执行整个项目
该卖家提供维修保养服务
该卖家提供备件
该卖家提供运输和物流