新 ZA TOTAL HP 在 米兰, 伦巴第, 意大利
新
规格参数
- 新旧状况
- 新
- Models za total hp
- 1.53.0
- Flow rate (max)
- 3 l/min6 l/min
- Outlet pressure (max)
- Inlet pressure – 2 bar (29 psi) @ maximum flow
- Total hydrocarbon
- < 0.05ppm
- Total co nox so2
- < 0.05 ppm
- Total co2
- < 0.1 ppm
- Dew-point (1)
- < -70°C (-94°F)
- Air inlet requirement
- ISO 8573-1:2010 Class [1:4:1]
- Max hydrocarbon content
- 100ppm
- Min supply pressure
- 6 bar (87psi)(2)
- Max supply pressure
- 10 bar (145 psi)
- Dew point
- < 5°C (41 °F)
- Temperature (min / max)
- 1°C (34°F) / 35°C (95°F)
- Rs485
- Standard
- Rs232
- Standard
- Supply voltage
- 100-240 Vac (±10%) 50/60Hz
- Connection type
- IEC320-C14
- Nominal power (max)
- 320 W
- Fuse rating (5x20mm)
- 4A (250Vac – T)
- Dimensions (w x d x h)
- 43 x 81 x 66 cm
- Net weight
- 85 kg
- Inlet port
- 1/4″ female BSPP
- Outlet port
- 1/4″ female BSPP
- Operating temperature
- 5-35°C (41-95°F)
- Storage temperature
- 1-50°C (34-122°F)
- Humidity (max, non condensing)
- 80% [5-35°C (41-95°F)]
- Noise
- < 35 dB(A)
- Ip rating
- IP20
- 产品编号
- 68938174
描述
The AirGen series ZA TOTAL HP is able to remove the total hydrocarbons to less than 0.05 ppm and other pollutant like Humidity, CO2, CO, NOx, SO2.The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. The hydrocarbons and CO are removed with a catalytic oven filled with palladium, the Humidity and CO2 is removed with a dual molecular sieve PSA system, NO is removed with Purafil and other components are removed with an active charcoal filter.