新 Julong (米亚基逆变直流焊接电源伺服加压)SDZ-300BS型 换向器自动点焊机 在 台州市, 浙江省, 中国
新
Doubleclick to zoom in
请联系卖家咨询
更多照片和设备细节。
规格参数
- 新旧状况
- 新
- 气源压力air pressure
- 0.5~0.7MPa
- 逆变器rectifier(可选optional)
- IPB-5000 / IS-300A
- 可焊线径wire diameter
- Φ0.12~0.5mm/Φ0.5~1.2mm
- 子类别
- 微电机转子设备
- 产品编号
- 67771879
描述
SDZ-300BS DC output Automatic Commutator Spot Welding Machine
本机是专为电机换向器与较粗电枢绕组连接的一种专用焊接设备。采用进口PLC控制器和触摸屏显示器控制焊机动作，伺服电机力矩控制方式加压，通过同步带轮带动丝杆控制焊接，在单个焊点可分别设定压力，配置大功率米亚基逆变焊机联合控制、可定电流、定功率、定电压等控制、多种焊接规范编号、多段通电方式。具有电流缓升、缓降功能。能通过各段焊接电流的合理选择来达到高质量的焊接，工件机械定位对槽，可设定角度补偿，配有内置冷却水箱，进口电磁阀控制焊接气缸，快速稳定，所有动作一次完成，操作简单，性能优越，焊接质量高。
This machine is designed for motor commutator
and thicker armature winding connection of a special welding equipment.Imported
PLC controller and touch screen display control welding action, servo motor
torque control mode pressure, driven by synchronous pulley screw control
welding, in a single solder joint can be set pressure, the configuration of
high-power MMA sub-inverter welding Machine control, can be set current,
constant power, constant voltage control, a variety of welding code number,
multi-section power mode. With the current slow rise, slow down function. Can
be selected by the reasonable choice of welding current to achieve high-quality