新 RACK ZA FID 在 米兰, 伦巴第, 意大利

规格参数

新旧状况
Models za rack fid
1.5361530.050.0
Flow rate (max)
1.5 l/min3.0 l/min6.0 l/m15.0 l/min30.0 l/min50.0 l/min
Outlet pressure (max)
Inlet pressure – 0.5 bar (8 psi) or 6.5 bar (94 psi)
Total hydrocarbon content
< 0.05ppm
Air inlet requirement
ISO 8573-1:2010 Class [2:4:1]
Max inlet hydrocarbon content
100ppm
Min supply pressure
3 bar (43psi)
Max supply pressure
10 bar (145 psi)
Temperature (min; max)
1°C (34°F); 35°C (95°F)
Rs485
Standard
Supply voltage
100-240Vac (±10%) 50/60 Hz
Connection type
IEC320-C14
Nominal power (max)
320 W500 W1000 W
Fuse rating (5x20mm)
4A (250 VAC – T)6.3A (250 VAC – T)10A (250 VAC – T)
Dimensions
Standard 2U rack (48 cm deep)Standard 4U rack (40cm deep / 65cm deep for 50.0)
Net weight
13 kg18 kg20kg
Outlet port
1/8″ female BSPP
Inlet port
1/8″ female BSPP
Water purge
Threaded ISO M5 female
Temperature
5-35°C (41-95°F)
Humidity (max, non condensing)
80% [5-35°C (41-95°F)]
Noise
< 35dB(A)
Ip rating
IP20
产品编号
59850095

描述

The AirGen series RACK ZA FID is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the RACK ZA FID Air can purify up to 50 L/min of compressed Air and can bear a pressure up to 6.5 bar (94 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium. The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. High efficiency coalescing pre-filtration and post filtration of particulate size greater than 0.01 microns are used to prevent any kind of particles from entering the analytical device.The RACK ZA FID has a very simple and efficient interface. It can also be managed by the HydroGen series and is ideal to supply Hydrocarbon free Air to FID detectors.

请向卖家询价

品牌
LNI Swissgas
类型
实验室气体发生器
位置
🇮🇹 米兰, 伦巴第, 意大利

对这台机器有兴趣吗?

卖家回复率:

4.75