新 NG CASTORE XL iQ 3D PRINTING 在 米兰, 伦巴第, 意大利
新
Doubleclick to zoom in
请联系卖家咨询
更多照片和设备细节。
规格参数
- 新旧状况
- 新
- Models 6920.70.130
- NG CASTORE XL iQ 3D PRINTING
- Flow rate (max)
- 70 l/min
- Outlet pressure (max)
- 9 bar (130 psi)
- Nitrogen purity (1)
- < 500 ppm @ 10 l/min
- Lcd with touch screen
- Standard
- Rs485
- Standard
- Rs232
- For service
- Power supply voltage (min-max)
- 220-240 Vac (±10%) 50/60 Hz
- Connection type
- IEC C20
- Rated power(max)
- 2.2 KW
- Net weight
- 175 kg
- Noise level
- < 50 dB
- Heat value (btu)
- 7510
- Dimensions (w x d x h)
- 59 x 92 x 73 cm
- N2 outlet port
- ¼” BSPP female (Fitting: Double ferrule compression fitting, tube 1/4”)
- Drain port
- ¼” BSPP female
- Temperature
- 5-35°C (41-95°F)
- Humidity (max, non condensing)
- 80% [5-35°C (41-95°F)]
- Ip rating
- IP20
- Pollution degree rating
- 2 (with no aromatic compounds)
- Altitude
- < 2000 m
- 产品编号
- 105852914
描述
The NitroGen series NG CASTORE XL iQ 3D PRINTING use Membrane technology.They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen up to 70 L/min with a purity up to 99.9%. The generator produces a continuos flow of Nitrogen with Laser grade in 24/7 production process worldwide, even under the most challenging environments to guarantee frictionless industrial use.This NG series is equipped with a scroll built-in oil less compressor with inverter technology. The new iQ series is equipped with the innovative direct drive motor-compressor system that result in lower noise than the previous version.The exclusive electronic flow control combined with the compressor control by the inverter allows to generate Nitrogen with a higher purity using a smaller volume at less pressure of air which results in reduced energy costs and increase the life time of the compressor.